Five Advantages Of Products
- Support analogue /on-off output, can match with EPC-A10 web guiding controller to use;
- Suitable for edge-tracking application of opaque, transparent and ultra-transparent film and line-tracking ultra-transparent thin film;
- No need adjustment and calibration manually;
- 200K ultrasonic correlation;
- 0.05 mS response time;
Ultrasonic Sensor US-500 for Printing Machine use Web Guide Control System
US-500/US-400S Ultrasonic sensor applies the principle of high frequency ultrasonic linear transmission to detect the edge of the material, comparing to photoelectric sensor, it will not be affected by the transparency of the materials. Thus it is very convenient and no need to adjust. It is suitable for edge application of opaque material (such as plastic film, paper etc and transparent material, such as cloth, but not for non-woven fabrics).
Support analogue /on-off output, can match with EPC-A10 web guiding controller to use;
Suitable for edge-tracking application of opaque, transparent and ultra-transparent film and line-tracking ultra-transparent thin film;
No need adjustment and calibration manually;
200K ultrasonic correlation;
0.05 mS response time;
Detecting range:6mm; detecting precision: 0.05mm;
With own offset display.
Tracking method: Edge tracking
Power input: DC 12V
Signal output: 0-5V/ two way switch signal
Detecting range: 6mm (±3.0mm)
Detecting precision: ±0.05mm
Carrier frequency: 200KHz
Protection level: IP 54
Weight: approx. 300g
Detecting methos: Ultrasonic through beam
Material calibration: No need
Dongguan Sunrise Precision Electromechanical Technology Co., Ltd.
Contact Person: summer
Department: Sales Department
Post: Sales Manager
Telephone: +86 15820882236
Company Address: Rm. 505, Unit 1, Hongyuan Kangcheng Bldg., No. 9, Hongyuan Gangkou Road, Nancheng Dist., Dongguan, Guangdong, China (Mainland)
Previous: Printing Machine Use Web Guide Co...